Aquarium air valve, flow regulator for Ø 4/6 mm tubing, green plastic – Zolux – set of 2
Adjust the air flow in your aquarium
This set of 2 Zolux air valves fits onto the hose connecting the air pump to the diffuser.
By turning the valve, you can adjust the number of bubbles: more air for a decorative bubbler, less for a quiet aquarium.
They connect to a standard Ø 4/6 mm air hose (not supplied).
Made from green plastic, they are lightweight and discreet, blending in easily near the aquarium.
In short: 2 valves supplied, green plastic, for Ø 4/6 mm air tubing.
They also allow the air from a single pump to be split between two diffusers, with independent adjustment for each.
Description
Why fit an air valve?
An air pump often delivers more air than is necessary.
The valve allows you to precisely control the flow of air to an air stone, an animated decoration or an air filter.
With two valves, you can also split the air from a single pump between two outlets and adjust each one separately.
Features
- Contents: 2 air valves
- Material: plastic
- Colour: green
- Compatibility: Ø 4/6 mm air hose (not included)
- Brand: Zolux
Installation
1. Cut the air hose to the required length.
2. Push each end onto a tap connector.
3. Switch on the pump and adjust the flow rate by turning the tap.
ℹ️ Good to know
Position the tap in an accessible place, out of the water, so that you can adjust the flow rate without getting your hands wet.
To protect the pump from water backflow in the event of a power cut, fit a non-return valve.
⭐ Tip from the team: reducing the air flow slightly often makes the pump run more quietly, whilst maintaining sufficient aeration.
❓ Frequently asked questions
Is the hose included?
No, only the two valves are supplied. They fit standard Ø 4/6 mm air tubing.
Can two diffusers be connected to a single pump?
Yes: with a T-joint and a valve on each branch, you can control each diffuser independently.