Coconut fibre substrate for tropical terrarium, compressed brick for 2 L - Trixie
A coconut fibre brick that makes 2 litres of substrate
This Trixie coconut fibre substrate covers the floor of tropical terrariums.
It suits reptiles and amphibians that live in a humid environment.
The fibre comes compressed into a brick of about 120 g.
Soaked in water, it expands 7 to 8 times:
one brick makes about 2 litres of ready-to-use substrate.
The fibre is heat-sterilised, free from fungi and germs.
It contains no added fertiliser and its pH is between 5.0 and 6.0.
To prepare it, place the brick in 0.5 to 0.8 litres of water, wait 30 minutes, then mix.
Origin: Sri Lanka.
Trixie also offers this substrate in 9 and 60 litres.
Sold individually: one brick per pack.
Description
A natural substrate for the humid terrarium
Coconut fibre holds moisture and stays loose.
It lets the animal dig and gives the terrarium the look of a forest floor.
Features
- Contents: 1 compressed brick
- Volume after expansion: about 2 litres
- Expands 7 to 8 times
- pH: between 5.0 and 6.0
- Heat-sterilised, free from fungi and germs
- No added fertiliser
- Composition: coconut fibres
- Brick weight: about 120 g
- Origin: Sri Lanka
Preparation
Place the brick in 0.5 to 0.8 litres of water.
Wait 30 minutes, then mix well to loosen the fibres.
If the fibre is too wet, let it drain before putting it in the terrarium.
ℹ️ Good to know : for a large terrarium, plan several bricks: each one makes about 2 litres.
⭐ Our team's tip : moisten the substrate with a spray rather than pouring water: the moisture spreads more evenly.
-
Manufacturer's reference76152
-
ColorBrown
-
Product weight (kg)0.12
-
Capacity (litres)2
-
Number of pieces in the pack1
-
OriginSRI LANKA
-
CompositionCoconut fibres
-
Additivesnone
-
Directions for usePLACE THE BRICK IN 0.5 TO 0.8 L OF WATER, WAIT 30 MINUTES AND STIR WELL
-
Main materialCoconut fibres
Coconut fibres -
Capacity in litres2